Category Archives: jasper

The Eagle Has landed….

All,

I have made it…. the move is complete!   I just wanted to say thank you for everyone that has been waiting on me.  I know I have taken a while on a few things, and I am finally in a position to run with everything again.  I finally have a decent internet connection [330mbps/330mbps]; so I will also be able to host things at high speed for us now as well.

As far as the installer goes, I hope to be done very soon with it ;  I am putting my final touches on it for the Pixel desktop.  If I get time I might be able to get Bluetooth working!  However, I have to get caught up first.

For those waiting on hardware, most has been shipped with a few exceptions.  I have notified those people.  I have a true ‘shop’ area again, and this will allow me to be much more efficient.  Meaning shorter wait times/etc…

 

Sincerely,

-M

Thank you to all… Jasper v1.6 Image News!

First, I would like to say thank you to the community members for helping out. I have gotten a lot of input on the new image.  This has also given me better feel for what the community wanted in an image. Which leads me to the next bit of news.


Some of you are undoubtedly wondering why I have not released my Jasper v1.6 image as of yet.  Well, I can assure you there are very good reasons.

Firstly,  I have had some severe family/health issues come up as of late which take priority.  I am also in the middle of moving a family of 5.  Combine that with the other reasons below, and I feel that most will feel the wait to be worth it.

This leads me to the next bit of news, however shocking it may be.

  1.  There will be no version 1.6 image.
    1. There will be no image at all…
  2.  Instead, there will be a full installer.
    1. This is one of the reasons for the delay.
  3.   The installer will work with a full GUI, and on the desktop.
    1. Examples:
      1. Full ubuntu Install.
      2. Fresh RPI install with GUI.
  4. The installer will be iterated on by feature going forward.
    1. We can add community approved features one at a time.
      1. Example:
        1. Change Jaspers Name
        2. Change STT after setup
        3. Etc.

FAQ (COMING SOON)

  • So whats that mean for me?
  • What do I do if I am running Jasper v.15?
  • Where do I get the installer?
  • Do I need to upgrade?

 

Jasper Polling Results for Image v1.6

  • Results of the Polls:
  • Presetup profile.yml enabled
  • GUI packages will be left on the devices
    • Increasing Size Dramatically
    • Increasing Update Time Dramatically
  • Jasper will not be pre-installed
    • There will be an installer with options
    • Daemon off by default
  • Home Assistant will be pre-installed
    • Daemon off by default
    • Mosquito MQTT Server installed with it

 


Would you prefer to have the profile.yml presetup as in v1.5?
  • Yes: 9
  • No: 0
Do you want GUI option, even though its not suggested?
  • Yes: 5
  • No, it will break: 2
Should v1.6 Have Jasper Already Installed?
  • Yes:  2
  • No:  1
  • I want installer:  7
Should HomeAssistant be included in v1.6?
  • Yes:  4
  • No:  1
  • Whats that?:  1

Jasper Kits on hold…

These were for the community, and I have enjoyed designing and building these kits.  However, I am at a point now, where I do not have the time to properly maintain and build and ship them.  This is not necessarily a permanent decision, I may bring them back in the future given I have the time.

That being said, I do have a few left.  If you are interested please let me know now.  I will get an exact count soon, and update it here.  Once they are gone, I will not be building more.

With all that being said, I am still here to help with questions.  I am also still developing what I hope is a better user experience with my images.  (Version 1.6 out soon!)

If you have any questions; or would like one of the last kits, I would suggest speaking up now.  Not that I will disappear, but I will be unable to spend the time on them for a while starting soon.

I also wanted to say thank you again to the community members that are helping each other, and the new guys.  I do notice, and it is appreciated.

-M

Jasper Image V1.6 – Release Date!

I have recently had a large number of people wanting to know the exact release date for the v1.6 image. I will release it without the installer, and release the installer separately so it can be used on images that are not mine.

  • Release Date:
    February 15, 2017

I would highly suggest that if there is annoyance; or fix for the next release that it be reported ASAP to the room in our SLACK.

 

Thanks for your patience,

Matthew Curry

Jasper Image v1.6 – Coming Soon!

There are already several improvements to the image, and I have put out feelers for any fixes/updates/etc that I can do to make the user experience better.  I already have a few of the obvious ones, however please feel free to report them in the new slack room “image-v1-6”, or in the Forums at the following LINK.

I am already working on it being pre-installed in the future with a REST api on it.  Making it easy to integrate with anything!

I will be posting the release notes with the new updates with the new image, and here as a post.  So please keep an eye out.

 

Thanks,
Matt

How AI listens in Jasper (and others)!

 There are two basic kinds of listeners, an active and a passive.  You will not get good offline (passive listener) results for a wide variety of speech currently.  Most offline listeners are used as ‘passive’ listeners. They usually just listen for the wake word or just a few small commands.  They are very accurate but can’t sustain a large vocabulary without CPU issues.  Some are also closed source such as Kitt.ai (snowboy), and require that you train each word on their site.

The other kind, aka the “Active listener”; or the one always listening.  Would be used to listen once activated by the passive listener, and has a much more broad vocabulary.  However, these are online only. Due to the way they work (gathering metadata to increase accuracy), its just not possible currently on a small device. Examples would be standard APIs such as Google, Wit.ai, Ivona/Polly, etc.

There are projects to fix these offline issues, but they are all in the works. See my site for info on some of them. mattcurry.com

NEW Jasper Documentation!

Hello All,

First, I want to thank everyone that has been patient with me so far in getting these things done one at a time…

I know it is not easy to get some of these things completed without good documentation.  So, with the help of a few community members, I have started what is a very rough draft of our documentation.  It is neither complete, or ready….  However, we are adding information as we go, so keep a close eye.  Even feel free to clone it, and contribute.  There will be documentation on how to do both of those coming as well.  Feel free to watch here, the repository, or the Support Forums/Slack for updates.  I update them all.

If you have items you would like to see added to the documentation, I would run it by myself, or d34dman first.  If we have not already written it (there are some not committed yet); then we will just let you know to put in a PR (aka Pull Request).  Once we have both reviewed it and give it a thumbs up.  We will merge it.

Alright, all that said… Here is the link to the documentation!

 

Thanks,

Matthew Curry

Jasper Image v1.5 Released

Major Updates

NOTE:  Be sure to do a “git pull” in the “Jasper-RPI-Tools” directory to get the updated scripts.

  • Installed Home-Assistant.io
    • Script to enable Home-Assistant.io Daemon
      • It is located /home/pi/Jasper-RPI-Tools/enable-hass-service.sh
    • Config under /home/hass/.homeassistant
    • Installed in Virtual Environment
    • Installed under the “hass” user.
  • Removed clutter from rc.local
    • Was causing harmless error at boot.
  • Installed needed dependencies for the development branch
    • libmad0 * libmad0-dev
  • Created/Enabled Service for jasper “jasper-daemon”
  • Created/Disable Service for Home-Assistant.io (user needs to enable)
  • Created Script to download a specified version of Jasper/Jasper-dev
    • It is located /home/pi/Jasper-RPI-Tools/installers/jasper-repo-installer.sh
      • You can pick what branch you would like to use at clone-time
  • Ensure phonetisaurus pre-compiled/installed
  • Removed Erroneous cron entries
  • Updated the OS and all related pkgs