Category Archives: chat

Building E-Vehicle/Robot for Son!

I am building a robot (named aptly: Kill Switch) from old parts I had laying around, and it is powered by hub motors from a ‘hover-board’.  The stats were pretty strong for small kids; so I am building a lot of safety into it.

This will include software, and hardware measures to ‘take over’ the device, and even limit speed.  Eventually I will be able to return him back to a certain spot with playtime is over.  I hope to automated charging as well eventually.  There are a lot of features I have ready; however I am still building out the hardware.

This can be difficult to do and keep extremely safe.  So for starters I am testing it only; and I have 2 kill switches I am putting in to ensure safety.  One the person will have to keep his foot on constantly for the buggy to run.  The other is a simple quick kill switch.  (Eventually these will be automated).

The Device already has an RPI3 with a small motor-controller for future automation’s.  This will control other aspects of the vehicle via software.  Such as speed limitations, power usage, GPS, WIFI, BT.  I will also be using a pico router to establish a LAN around the device.  This is for media, as the vehicle will have speakers/screen to watch/host media on the LAN.

Hardware Safety Features:

  • Dash Kill Switch
  • Foot Kill Switch
  • Flip/Tilt Sensor
  • Lights
  • Front
  • Rear

Once testing is completed, and it works; I will go through how I set it up.  However, this will be piece by piece as I do it.  I have even considered some youtube videos.  However, that will depend on my success in doing this on a budget.  I am also using completely reclaimed parts, minus a couple bolts I bought.  So its been free so far.

On that note, I have been building the chassis, but if anyone in the Dallas, TX area has an old go-cart frame that rolls/steers, I am looking.  I think it would make it a lot lighter.  Shoot me a message, info is on my contact me page.

 

MUCH More to come… Please keep an eye on the series…

-M

The Eagle Has landed….

All,

I have made it…. the move is complete!   I just wanted to say thank you for everyone that has been waiting on me.  I know I have taken a while on a few things, and I am finally in a position to run with everything again.  I finally have a decent internet connection [330mbps/330mbps]; so I will also be able to host things at high speed for us now as well.

As far as the installer goes, I hope to be done very soon with it ;  I am putting my final touches on it for the Pixel desktop.  If I get time I might be able to get Bluetooth working!  However, I have to get caught up first.

For those waiting on hardware, most has been shipped with a few exceptions.  I have notified those people.  I have a true ‘shop’ area again, and this will allow me to be much more efficient.  Meaning shorter wait times/etc…

 

Sincerely,

-M

Google Disables Hangouts API…breaking many services.

I have seen much FUD around this, and I wanted to clarify so people are aware what Google’s Intentions are for Hangouts.  As I am a heavy user of the product, I was very surprised to see this.  It appears that Google will still keep Hangouts around, but for the ‘normal’ user demographic only.  They will be disabling their API on April 25.  This however, should not be a complete surprise.  Google has made it clear that with the arrival of their new products Allo and Duo that they are switching to an enterprise vision for many of their products.  However, they will NOT BE REMOVING IT COMPLETELY, as mentioned in the linked engadget.com article.

What does this mean for you? The ‘End User’, if just using the services at face value may not even see a difference.  However, services and sites that use the integration features will likely be affected.  They (google) have allowed for an exception, and that is if they site/service qualifies as an “Enterprise Communication Tool”, slack for example.  There won’t be many of those I expect.

Basically it comes down to this, they are ending the Hangouts API integration (publicly) on April 25th.

 

Hope that helps,

Matthew Curry